This post may contain affiliate links. Please read our disclosure for more information.






Why I love it
Stage design is a different type of art. I am familiar with video and photography and how light in a photo or video can evoke emotion or direct attention. So stage design is a natural extension of that. Where video and photography are a 2-dimensional medium showcasing 3-dimensional environments, stage design has depth. It has different viewing angles and dynamic lighting. It’s challenging and fun.
Giant Props to support a mission
I was tasked with coming up with some striking visual element to remind people of an ongoing campaign titled, “Go For the Gold”. So naturally, we made gigantic gold medals out of styrofoam.










I had never used a hot knife foam cutter before or worked with foam on such a giant scale. It was a fun challenge. And in the end, it was quite successful. I even built my own hot wire cutter.




Rethink, I AM, and Momentum
Another couple of projects to support a specific theme. One was a theme of rethink for a series over a couple of months. So, I designed a visual cue on the stage to spur conversation and remind every one of our series. I used Coroplast corrugated plastic and RGB led lights wired to a controller. All of that was wired back to our DMX lighting system so it could be programmed into the show scenes. It was pretty striking and effective.




“I AM” was designed in photoshop and projected on the wall. The shattered pieces were then tacked to the wall and lit from above and below.


Momentum again used Coroplast and RGB LED lighting to give it it’s unique look.

Broken Heroes
“Broken Heroes” was especially fun to create. I wanted a design that looked like the top of an old building in a large city. But with limited space for depth, we had to get creative with dimensions. The Bricks are 5/8 scale. I wanted the marquee to light up like an old theater or building name. So we used styrofoam and Coroplast to give it an old school, metal marquee look. The lights are cheap patio lights from Walmart and the whole thing was weathered.




I also wanted the windows to be lit like the building was occupied. So we came up with a clever design to keep the cost down and ended up making our job so much easier. Instead of frosting plexiglass or some other solid material, we used shower curtains. The curtains are stretched on the back of the window frame. Then, we added a small lip and ran LED lights to edge light the window. Finally, we capped the back with Coroplast to keep light leak to a minimum and to help the light on the windows fill the interior space and evenly light the windows.



When it all finally came together, it looked pretty good. Also, as a side note, I wired everything back to a controller and dimmer packs so it could all be addressed and programmed into our DMX lighting system.


Artistic Interpretation
After about a year and a half of some pretty successful designs, we decided to take a risk and go down a more artistic route. I remembered seeing a set that looked like a painting on stage with some 3D elements spilling out on to the stage. I mocked up a design that we liked. I then took that design and modeled it to scale and projected on the stage to aid in building. We used some solid wood beam end cuts from a local mill that we picked up for a steal. they gave it a nice, rustic feel. We then stained the wood with various stains to get the colors we wanted. We were able to follow the projection in order to get our shapes and contours the way we wanted them.









